Metal scrap crusher works: mainly by the impact of crushing the material, the crushing process is roughly the case, the material into the crusher, suffered high-speed rotary hammer impact and broken, crushed material, from the hammer Get kinetic energy, high-speed rushed to the body baffle, screen, at the same time the material impact each other, was crushed several times, less than the gap between the screen material discharged from the gap, the individual larger material in the screen again After the impact of the hammer, grinding, crushing and crushing, the material is hammer out from the gap, so as to obtain the desired size of the product.
Metal Crusher is mainly used to realize the decomposition and crushing of large mouth waste metal, and to realize the fine crushing of waste metal, so as to achieve a better benefit prospect in the transportation cost and recovery price of waste metal. This series of equipment is a kind of multi-purpose and high efficiency metal kneading ball equipment produced by our factory. it can be used to achieve good paint removal effect and granulation effect whether it is used in end-of-life cars or waste cans.
In the working flow, the metal pressing block is fed into the forced feeding and crushing port of the equipment through the feeding device, and the metal pressing block is primary broken by the crushing process of the pressing roller and the coarse crushing shaft, The metal pressing material after primary crushing enters the main engine cavity of the equipment, and under the drive of a high speed and high torque motor, the hammer head on the rotor of the main engine takes turns hitting the metal pressing material entering the main engine cavity through the space between the lining plate and the hammer head, When the crushing block can be fully and effectively broken in the crushing chamber, the crushing block can be torn into a fragment in accordance with the specifications, and then flow down from the screen. The broken material is separated by an air rotary sorting system, and the paint, rust and waste plastic in the metal press block are separated, and the material unloaded at the bottom of the equipment is then transported to the aggregate point through the conveying equipment, In this process, the non-magnetic materials contained in the materials are separated and unloaded from the production line to the non-magnetic materials pile under the action of the magnetic separator.
In addition, the whole system is equipped with dust removal device to minimize the harm of dust pollution in the production process. The equipment mainly has the advantages of high output, low energy consumption, high efficiency, uniform discharge and so on. When the equipment is used, the noise is low, there is no pollution, the operation is simple and the maintenance is convenient.
(1) selection of equipment type.
(2) Design and manufacture products according to the special requirements of customers.
(3) training of technical personnel for clients.
(4) The company plans the site for the user free of charge, designs the suitable process and the plan.
(1) acceptance of the product.
(2) assisting clients in the preparation of construction plans.
(1) assign special after-sales service personnel free of charge to guide customers to install and debug.
(2) installation and debugging of equipment.
(3) on-site training of operators.
(4) after the installation of the complete set of equipment, the full-time technical personnel may assist the customer in on-site production until the user is satisfied.
Looking for ideal Scrap Metal Breaking Machine Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Mining Metal Crusher
are quality guaranteed. We are China Origin Factory of Metal Crusher with Huge Capacity. If you have any question, please feel free to contact us.
Product Categories : Crusher Machine > Metal Crusher