Shuangxing Mechanical Equipment Co.,Ltd
Model No.: SXMC-183
Knife Type: Other
Packaging: 1pcs in a container
Place of Origin: China
Rubber shredding machine and intelligent two-axis shredding machine, through cut, tear, and extrusion to decrease the size of the material. Our company is production of rubber shredding machine after many years of research and practice, and according to the actual situation to improve the domestic research and development, with mature technology and advanced design of biaxial rubber shred machine series.
Rubber Shredder is specially used for crushing rubber products crushing equipment. The purpose is to break the rubber products into small pieces, in order to facilitate the follow-up processing, is the necessary equipment for breaking rubber products, used tires. Rubber shredding machine has high automation and high production efficiency, which can make users use large size rubber economically and effectively. Generally in the range of the feeding box can be put into the rubber products, but do not need to cut and decompose, directly to shred the broken work.
Rubber shredding machine has high automation and high production efficiency, which can make users use large size rubber economically and effectively. Generally in the range of the feeding box can be put into the rubber products, but do not need to cut and decompose, directly to shred the broken work.
Rubber shredder equipment is used in waste plastic, waste rubber, wood, paint bucket, waste home appliance shell (plastic shell, metal shell), large tire, large nylon material, rubber head material, large fishnet, large pipe, fiber, paper and other large volume waste.
Principle of equipment:
The main shaft of the equipment is supported by two ends of bearings. The motor is transmitted to the main shaft through the gear box. The rotating main shaft drives the helical cutter, and the rotating main shaft drives the cutter to mesh, shredding the material and completing the cutting task. The electric control part is equipped with a reverse automatic control device to overcome the major technical problems of the machine. In order to improve the service life and cutting ability, the spindle and cutter are tempered and tempered.
Characteristics of the equipment:
Rubber shredder is composed of box, motor, industrial gear box, six-arris spindle, imported cutter, bottom cutter, rack, bearing box and other main structures.
1. Thick and heavy moving knife, high crushing efficiency, the cutter is cast by alloy steel, strong and long service life.
2. Thick frame plate, high torque resistance, very strong.
3. Adopt microcomputer (PLC) automatic control, set up start, stop, reverse and overload automatic reverse control function.
4. The equipment has the characteristics of low rotation speed, large torque, low noise and dust which can meet the environmental protection standards.
5. Easy to adjust, low maintenance cost, economical and durable.
6. The thickness of the tool and the number of claws can be changed according to different materials.
1, after starting, for the machine to run properly, allowed uniform continuous feed crops.
2, pay attention to the speed of the motor, when working voice and the temperature of the bearing.
3. When feeding, the operator should stand on one side of the feeding mouth, tighten the sleeves of the clothes, and wear a mask and working cap.
4, feeding, attention should be paid to inputs if there is a stone inside, sickle, tools with hard objects, such as screw, in order to avoid damage to the machine and cause accidents.
5. No belt hanging, oiling, cleaning and troubleshooting are allowed when the machine is running.
6, found the following problems should be shut down the engine, stop processing, motor smoke, crush quality is not good, bearing overheating, more than 60 degrees.
Strictly prohibited items:
1. It is strictly forbidden to peep into the machine from the upper part of the broken cavity during operation.
2. electrical equipment should be connected to the ground, wire insulation should be reliable and installed in the steel pipe laying.
3. It is strictly forbidden to move or remove materials directly by hand in the crushing cavity behind the feeding port during operation.
4. the mill in the operation of any adjustment, cleaning or maintenance work is strictly prohibited.